High-Grade Material Straight Thread Steel Rebar Coupler Premium Quality

Product Description

Detailed Photos

 

Product Parameters

  

Steel bars are used as steel bars in the construction of buildings or other structures to enhance the strength of concrete. In columns and beams, steel bars must be connected or spliced together. Steel bar joints are one of the best methods for connecting steel bars. It is also known as mechanical splicing. Steel bar joint (also known as mechanical splicing) is a sturdy nut used to connect steel bars. Both ends of the steel bars have threads, and the steel bar connectors connect them together. In this case, there is no need for overlapping steel bars.

Coupler Size	Outer Dia ±0.5mm	Inner Dia +0.25mm	Length +2mm	Thread Pitch (mm)	Thread Angle	Weight/Pc (kg)
D12	19	10.28	35	M12*1.75P	60°	0.036
D14	21	12.55	38	M14.8*2.5P	60°/75°	0.068
D16	24	14.50	43	M16.8*2.5P	60°/75°	0.099
D18	27	16.35	48	M18.6*2.5P	60°/75°	0.125
D20	29	18.45	53	M20.6*2.5P	60°/75°	0.180
D22	33	20.35	58	M22.6*2.5P	60°/75°	0.205
D25	37	23.15	63	M26.0*3.0P	60°/75°	0.317
D28	41	25.95	68	M28.6*3.0P	60°/75°	0.399
D32	47	30.15	80	M32.8*3.0P	60°/75°	0.640
D36	54	33.85	83	M36.7*3.5P	60°/75°	0.900
D40	59	37.55	88	M40.4*3.5P	60°/75°	1.099
D50	74	47.10	125	M50.4*3.5P	75°	1.298

There are three methods for splicing steel bars:
1) Overlapping: Steel bars are connected by overlapping at the joint. The overlapping length is 50-70 times the diameter of the rod. The larger the pole, the greater the length of overlap.
2) Steel bar connector: a nut used to connect steel bars. Cut threads at both ends of the steel bar and connect them together using a steel bar coupler. No need for overlapping steel bars.
3) Welding: Two steel bars are connected by overlapping welding. The required overlap length is less than the overlap length. However, welding sometimes reduces the quality of the welding rod, so it is crucial to ensure that the type of welding rod is suitable for welding.
Among these three methods, the steel bar coupler is the most economical, simple, and earthquake resistant method.
According to ACI specification ACI 318-19, steel bar joints are divided into two types:
Type 1 steel bar joint:
If the ultimate strength of the joint is 25% greater than the yield strength of the rod, it is classified as Type 1. In this case, cut the thread at the end of the steel bar and connect it using a coupler. The diameter of the rod decreases at the thread, resulting in the ultimate strength of the coupler being lower than that of the rod. In the tensile test of the rod, there is a malfunction in the threaded area or at the end of the coupling. Although Type 1 couplers may be used under certain limitations, they are not recommended for constructing seismic resistant structures. For OMRF and IMRF, Type 1 steel bars can only be used to splice up to 60 levels of steel bars at designated locations in columns, beams, and shear walls.
Type 2 steel bar coupler:
If the ultimate strength of the coupler is 25% greater than the yield strength of the rod and equal to or greater than the ultimate strength of the rod, it is classified as Type 2. In this case, before cutting the thread, the diameter of the rod is increased by cold forging, and then the thread is made. The diameter of the rod will not decrease in the threaded area, resulting in the ultimate strength of the coupler being greater than that of the rod. In the tensile test, the rod far away from the coupling malfunctioned. Type 2 steel bar connectors can be used in all situations and play a crucial role in the construction of earthquake resistant buildings and structures.
According to the purpose, there are three types of steel bar joints:
Standard joint: A standard joint is used to connect two steel bars with the same diameter. In this case, the rod must be rotated and installed together with the coupling.
Reducing joint: A reducing joint is used to connect two steel bars of different diameters. The diameter of the rod in the column or pillar gradually decreases upwards. In this case, the diameter of the rod must be changed through the reducer coupling.
Position coupler: If the coupler cannot be installed by rotating the rod under any circumstances, a position coupler is required. The steel bars of cast-in-place piles should be spliced using positioning couplers.

Product Description

Company Profile

ZRD Rebar Couplers Co., Ltd. is one of leading manufactures in rebar couples for more than 12 years.

As a leading supplier in providing rebar couplers and rebar splicing machines. We are specializing in supplying the construction and industrial sectors with Rebar Splicing Solutions and Products through constant innovation and providing premium quality. All our products are manufactured with advanced equipment and strict QC procedures to ensure high quality. The products are very simple to operate, safety in use and humanized design. Guaranteeing stable and timely supply, credible quality and sincere service, designed and manufactured in compliance with JGJ107, GB / T45001 - 2020 / ISO45001: 2018, GB / T45001 - 2016 / ISO45001: 2015.

Since its establishment, the company has continuously won multiple honorary titles such as National Product Quality Service Customer Satisfaction Brand, National Quality and Credit Double Guarantee Demonstration Unit, Hebei Province High tech Enterprise, Hebei Province High tech Product, Contract abiding and Creditworthy Enterprise, etc. The company currently has over 100 employees, including 8 engineering and technical personnel, covering an area of 8600 square meters. We have passed ISO9001 quality system certification and have a reliable quality assurance system.

At present, the company mainly produces various building steel bar connection equipment and steel bar mechanical connection sleeves, while providing various forms of steel bar connection complete sets of technology and on-site high-quality services, as well as producing construction aids such as rolling wheels, cutting tools, steel bar thread head special gauges, torque wrenches, etc. That are matched with steel bar mechanical connections. We always adhere to honest management, customer-centric, quality-oriented, and reputation driven development. We look forward to working with you to open a new chapter in international trade and create a brilliant future together!

partners

FAQ

1. Q: Are you a trading company or manufacturer?

    A: We are an original equipment manufacturer.

2.  Q: How about the quality?
     A: All products undergo 100% testing before shipment to ensure product quality.
 

3. Q: How long is your delivery time?

    A:  A:Generally it is 7days if the goods are in stock or it's 12-15days if the goods are not in stock , all depends on the quantity .
 

4.Q:What are the terms of payments you offer?

   A:Payment of the goods should be sent in USD or RMB on the basis of goods Values. We acceptpayment of T/T, L/C, etc.